C-Port^®-II

Questions? Just call us

Product Information (pdf)

Patient Information (pdf)

Port catheter care (PDF)

The C-Port^®-II, our economical plastic version of an implantable port that is also suitable for high pressure infusion.

The C-Flow^® chamber of the C-Port^®-II differs from most conventional ports with a cylindrically shaped port chamber by the optimized inner chamber geometry and the baseline outlet. This results in improved flow dynamics.

That this is also measurable can be seen here

Through the septum of the NuPort^®, which is integrated in the C-Port^®-II, it is still possible to see into the chamber during implantation and to monitor venting and flushing.

Port Chamber
a) Clear septum and base-line outlet simplifies debubbling of the port minimizing the risk of an air embolus.
b) The C-Flow reservoir improves fluid dynamics reducing the risk of premature occlusion.

Connection
The ergonomic locking mechanism provides audible and tactile features and responses during connection. These two features provide the surgeon with added security to ensure secure attachment of the catheter to the port.

The advantages at a glance

reduced risk of occlusion and infection
improved flushing efficiency
low maintenance required
facilitates blunt preparation of the port pocket
MRI compatible up to 3-Tesla
many catheter variants

plus simplified

blood product administration
blood collection
parenteral nutrition
high viscosity medications

Specifications

C-Port^®-II Basic System

Single lumen venous system for
Implantation by means of venous cutdown

Content:
C-Port^®-II, catheter, catheter fixation,
Huber cannula straight, irrigation cannula,
vein lifter, 10 ml syringe

C-Port^®-II Complete System
with percutaneous introducer set

Single lumen venous system for
Implantation by means of percutaneous technique

Content:
C-Port^®-II Basic system, introducer
(Seldinger) needle,
Split-Sheath with dilator,
Guide wire with insertion aid, tunneler

Material

PortPlastic

Catheter ConnectorTitanium

SeptumSilicone

Volume

Total volume~ 0.5ml

Weight

Total weight6.3g

All catheters with rounded tip and length markings at 1 cm intervals from 1 cm to 30 cm, radiopaque.

Ordering Information

Catheter	Size	O.D.	I.D.	Length	Ref. without Introducer Set	Ref. with Introducer Set
Polyurethane	6.6F	2.20mm	1.28mm	70cm	KP-066CP	KP-066IP
Polyurethane	7.5F	2.50mm	1.15mm	50cm	KP-075CP	KP-075IP
Silastic^®-Silicone	8.0F	2.67mm	1.40mm	50cm	KP-008CS	KP-008IS
Polyurethane	9.0F	3.00mm	1.60mm	50cm	KP-009CP	KP-009IP
Silastic^®-Silicone	9.6F	3.18mm	1.58mm	50cm	KP-096CS	KP-096IS

The measurable difference

In the FDA guidelines for the approval of ports, a defined measurement setup* is described, the so-called "Clearing Index". This indicates how much flushing volume is required to flush out (clean) a port chamber without leaving any residue. This test has also been adopted in the ISO standard for port catheter systems 10555-6**.

This can be used to illustrate the measurable differences between different port designs.

In a study by Norfolk Medical Inc., USA ***, the respective flushing characteristics were compared in a measurement of four different port systems. The difference between the system with a conventional cylindrical port chamber and central catheter outlet and our NuPort^® chamber geometry with tangentially positioned catheter outlet is clear:

Almost 40% more flushing volume is required with a conventional port for residue-free flushing.

The chamber geometry therefore makes the decisive difference in the flushing (cleaning) of port systems. Under certain circumstances, this is precisely the difference that prevents occlusion of the port system.

NuPort^® chamber, significantly improved flushing efficiency

C-Port^® chamber, improved flushing efficiency

Conventional cylindrical port chamber, inferior flushing efficiency

Average values chamber flushing volume*

Port	Port Chamber	Flushing volume difference in percent
NuPort^®-CT	Elliptical tangential outlet	Reference value
C-Port^®-CT	Elliptical central baseline outlet	+ 6.9%
Conventional Port A High Pressure Injection	Cylindrical central outlet	+ 23.3%
Conventional Port B Standard	Cylindrical central outlet	+ 39.5%

* FDA "Guidance on 510(k) Submissions for Implanted Infusion Ports".
** DIN EN ISO 10555-6, Annex B "Determination of the flushing volume (clearing index)".
*** Measured values determined by Norfolk Medical, Inc. USA with reference to FDA "Guidance on 510(k) Submissions for Implanted Infusion Ports" and DIN EN ISO 10555-6

C-Port®-II